Monday, December 09, 2019

New Products

1911 newProducts fg01

E Band Omnidirectional Antenna

Model SAO-6039030230-12-S1 is a WR-12 omnidirectional antenna that operates between 60 and 90 GHz. This vertically polarized antenna offers 360 degrees azimuth coverage with ±3 dB angular gain flatness. The antenna features a half power beamwidth of 30 degrees in the vertical direction and typical 2 dBi gain across the entire frequency range.

SAGE Millimeter

1911 newProducts fg02

0.1 to 50.0 GHz SP2T - Solid State Switch

PMI Model No.P2T-100M50G-100-T is an absorptive, single pole two throw pin diode switch that operates over the 0.1 to 50.0 GHz frequency range. It features low insertion loss and high resolution in a slimline package. This model also incroporates a TTL compatible driver for ease of system integration.

Planar Monolithics Industries

1911 newProducts fg03

RF Attenuators

Pasternack launched a new line of 10, 25, 50 and 100 Watt RF attenuators with operating frequencies up to 18 GHz depending on the configuration. Pasternack now offers 31 high power, fixed attenuators which offer attenuation levels of 3 dB, 6 dB, 10 dB, 20 dB, 30 dB and 40 dB. Additionally, in-series connector gender interfaces are available in male-female configurations with both SMA and Type-N connector options. These new fixed RF attenuators boast power ratings of 10 Watts, 25 Watts, 50 Watts or 100 Watts and a peak power rating of 500 Watts.


1911 newProducts fg04

Frequency Converters

Norden military converters and custom assemblies are used in Airborne (fixed and rotary wing), Shipboard, and Ground Mobile platforms. Military applications include Avionics, Electronic Warfare including (ECM, ESM, ELINT, SIGINT), RADAR applications, radar environment simulation systems, and intelligence, surveillance and reconnaissance (ISR) systems. Norden’s commercial converters and custom assemblies are used in Microwave Communications, Astronomy, and Test Equipment. Whatever the customer requirement, Norden can design and deliver a product that will fulfill the customer’s specifications.

Norden Millimeter

November 2019

1911 HFE cover

The November 2019 Online Edition is now available for viewing and download!

Download November HFE PDF



Web Exclusives


AWR logo


3D Glass mmWave PDK

A new 3D Glass Solutions (3DGS) glass-based mmWave RF device PDK for use with NI AWR software has been released and is available directly from 3DGS. The PDK enables designers to develop passive components such as filters and amplifier impedance-matching circuits critical for 5G FR2 communications, automotive radar, and other mmWave applications.

A Designer’s Primer on 5G Communications

Recent advances in NI AWR software are helping designers develop the antenna and RF front-end components that are making 5G a reality. This primer offers content on the innovative wizards and synthesis technologies that enable engineers designing 5G communications systems to deliver cost-effective, high performance, and high-reliability products to market.

Contact Us

Gary Rhodes
Advertising Sales - Mid Atlantic
Fax: 631-667-2871

Scott Spencer

Tim Burkhard
Associate Publisher/Managing Editor
Fax: 707-544-9375

Stuart Dale
Advertising Sales – New England

Jeff Victor
Advertising Sales - Western U.S. - New Accounts
Fax: 509-472-1888

Sam Baird
Advertising Sales - UK and Europe
+44 1883 715 697
Fax: +44 1883 715 697

Joanne Frangides
Advertising Sales - New Accounts & Product Showcase
Fax: 201-666-6698

Insulated Wire Inc.

Insulated Wire Inc. is pleased to announce that following the retirement of a French delegate, IW Microwave Products Division President, John Morelli, has been appointed as the Secretary for IEC/SC46F, a subcommittee of IEC/TC46. IEC/SC46F is responsible for RF and Microwave Connectors and Components International Standardization.

Mr. Morelli, who is sponsored by Insulated Wire, brings significant RF/Microwave connector and component experience to the position, and we congratulate him on his new appointment. Mr. Morelli had been serving as the chief Technical Advisor for the US National Committee’s Technical Advisory Group to IEC/SC46F.

The US National Committee of the IEC is a fully integrated entity of the American National Standards Institute (ANSI).

Coming Events

IMS 2019, Boston, June 2 - 7, 2019

IEEE EMC + SIPI, New Orleans, July 22 - 26, 2019

IEEE AUTOTESTCON, National Harbor, MD, September 9 – 12, 2019

EuMW 2019, Paris, September 29 - October 4, 2019

MILCOM 2019, location TBD, October 2019 (date TBD)

AOC, Washington, DC, October 28 - 30, 2019

IEEE Radio and Wireless Symposium, location TBD, January 2020 (date TBD)