Friday, January 18, 2019
Text Size

What’s Next: Exploring Four Innovations’ Impact on Radar Technology

Parent Category: 2018 HFE

By National Instruments

In aerospace and defense, some of the biggest areas of innovation and investment aren’t on the battlefield, but rather in the electromagnetic spectrum. From electronic countermeasures to electronic counter-countermeasures, techniques for intelligence, surveillance, and reconnaissance systems are evolving quickly.

This means engineers’ jobs are ever-evolving and more challenging than ever. System complexity may be increasing, but timelines and budgets certainly aren’t. Yet, underlying technologies are stepping up their game with the ability to design more sophisticated systems more quickly.

Four recent innovations will have huge enabling impacts on radar technology over the next several years:

Gallium Nitride for Front-End Components

Gallium Nitride (GaN), considered by some to be the biggest semiconductor innovation since silicon, is a material that is capable of operating at a much higher voltage than conventional semiconductor material. Higher voltage means better efficiency, so RF power amplifiers and attenuators using GaN consume less power and produce less heat. As more GaN-based RF component suppliers enter the market with production-ready, reliable products, the use of GaN-based amplifiers has increased.

1812 5G fg01

Figure 1 • AESA Radar Architecture.

This technology is important for the evolution of active electronically scanned array (AESA) radar systems. An AESA is a fully active array with hundreds or thousands of antennas, each with its own phase and gain control. Using a phased array of transmitters and receivers, these radar systems steer beams electronically without physically moving the antenna. These types of radar systems are growing in popularity because of their increased power on target, spatial resolution and improved robustness compared with other conventional radars. For example, if one element in the array fails, the radar continues to operate. The increased use of GaN amplifiers in AESA radars should offer better performance, achieving equivalent output power with smaller form factors and requiring less cooling.

As applications and solutions using GaN technology grow more advanced, correlating component-level test results with those at a system level becomes more critical. Traditional methods of component test using vector network analyzers provide an accurate and narrowband view of forward and reflected gain and phase. However, the continuous wave (CW) stimulus in this popular method does not accurately reflect the actual signal environment the component is ultimately used in. As an alternative, you can take advantage of the wideband flexibility of vector signal analyzers and vector signal generators to create pulses and modulated stimuli more representative of real-world applications and their environments. Combining this capability with S-parameter analysis is an increasingly more strategic method of testing at a component level.

High-Speed Data Converters for Transmit and Receive

Another exciting advancement is in converter technology. The latest analog-to-digital converters (ADCs) and digital-to-analog converters (DACs) being released by major semiconductor companies are ultra-fast.

This is great news for radar, because the wider bandwidth not only allows for better spatial resolution but also makes it possible to implement some pretty interesting techniques. For example, a radar can hop around to different frequencies to avoid detection or use the same sensor to act as both a communications system and a radar simultaneously.

These converters are so fast that it’s actually possible to perform “direct RF sampling,” which simply means sampling so fast that you can acquire RF signals directly without up- or down-converting.

For example, the newest FlexRIO transceiver has 12-bit resolution up to 6.4 GS/s. At these rates, it’s possible to directly sample RF input signals up to C-band by moving much of the signal processing to the digital domain. This is also a big deal for AESA radars, because when you’re dealing with thousands of antennas, you can reduce the size and cost significantly by eliminating mixers and local oscillators.

1812 5G fg02

Figure 2 •  Heterodyne Versus Direct RF Sampling Architecture.

Evolving FPGA Technology for Cognitive Techniques

Unsurprisingly, FPGA technology also continues to improve year after year. The computational capability of today’s FPGAs opens the door for innovative techniques that weren’t possible five years ago.

For example, engineers are now applying machine learning techniques so that radars are more responsive to their environment. By using machine learning, radars can perform new techniques like automatically recognizing different targets, or adjusting their operating frequency or waveform based on what’s going on around them.

In addition, higher level FPGA programming tools like the LabVIEW FPGA Module are becoming more capable, making it easier to port algorithms to FPGAs. This is a game changer for engineers and scientists who don’t have previous hardware description language (HDL) expertise or who have tight timelines. The tight integration between NI hardware and software allows LabVIEW FPGA to go a step further by abstracting the hardware infrastructure, such as PCI Express, memory controllers and clocking.

High-Bandwidth Data Buses for Sensor Fusion

Another key technology that’s paved the way for radar innovation is the evolution toward higher bandwidth data buses such as PCI Express Gen 3 and Xilinx Aurora. Using these buses allows you to aggregate data from multiple sensors for centralized processing.

1812 5G fg03

Figure 3 • Machine Learning Techniques Implemented on the FPGA Within Cognitive Radar.

In the same way that autonomous vehicles use sensor fusion to aggregate data from sensors like radar and LIDAR, you can use sensor fusion for fighters such as the F-35. Combining the data from radars, electronic countermeasure devices, communications devices and other sensors ultimately provides pilots better situational awareness.

With the rapid evolution of these underlying technologies, it’s unsurprising that radar techniques and architectures are also evolving. As technology continues to advance, systems must evolve to keep pace. With both design talent and an intimate knowledge available in-house, developing fully custom hardware and software for radar prototypes and test systems internally can seem like the only viable option to achieve the required customization and performance. However, these solutions also come with long-term maintenance responsibility and opportunity cost.

1812 5G fg04

Figure 4 • Aggregating Sensor Data From Multiple ISR Sensors for Centralized Processing Using High-Speed Data Buses.

With the advent of the FPGAs and rapid adoption of new converters and streaming technologies in modular form factors, COTS solutions not only meet specification requirements but can offer flexibility to ensure systems achieve the longevity required for longer life cycles. By rapidly incorporating these technologies in modular, COTS form factors, NI enables engineers to meet the evolving requirements of advanced radar systems while also meeting strict timelines and budgets.

December 2018

1812 HFE cover

The December 2018 Online Edition is now available for viewing and download!

Download December HFE PDF


Web Exclusives

Contact Us

Scott Spencer

Tim Burkhard
Associate Publisher
Fax: 707-544-9375

Gary Rhodes
VP Sales
Fax: 631-667-2871

Jeff Victor
Advertising Sales - Western U.S. - New Accounts
Fax: 509-472-1888

Keith Neighbour
Advertising Sales - Central US
Fax: 773-275- 3438

Sam Baird
Advertising Sales - UK and Europe
+44 1883 715 697
Fax: +44 1883 715 697

Zena Coupé
Advertising Sales - UK and Europe
+44 1923 852 537
Fax: +44 1923 852 261

Joanne Frangides
Advertising Sales - New Accounts & Product Showcase
Fax: 201-666-6698

Insulated Wire Inc.

Insulated Wire Inc. is pleased to announce that following the retirement of a French delegate, IW Microwave Products Division President, John Morelli, has been appointed as the Secretary for IEC/SC46F, a subcommittee of IEC/TC46. IEC/SC46F is responsible for RF and Microwave Connectors and Components International Standardization.

Mr. Morelli, who is sponsored by Insulated Wire, brings significant RF/Microwave connector and component experience to the position, and we congratulate him on his new appointment. Mr. Morelli had been serving as the chief Technical Advisor for the US National Committee’s Technical Advisory Group to IEC/SC46F.

The US National Committee of the IEC is a fully integrated entity of the American National Standards Institute (ANSI).

Coming Events

IEEE AUTOTESTCON, National Harbor, September 17-20,2018

IEEE EMC-Long Beach, July 30-August 3, 2018

IEEE International Conference on Mobile Terahertz Systems 2018 (ICMTS 2018) Duisburg, July 2-4, 2018

IMS 2018, Philadelphia, June 10-15, 2018

WAMICON, Clearwater, April 9-10, 2018