Monday, May 29, 2017
   
Text Size

High Quality Signal Switching in the 60 GHz ISM Band

Parent Category: 2017 HFE

By Dr. Kecheng Xiao

The 60 GHz unlicensed Industrial-Scientific-Medical (ISM) band from 57 to 64 GHz is getting lots of attention, due to its potential to meet the demand of high data-rate wireless communications. It allows for an unprecedented capacity of information and is ideal for a number of wireless personal area network (WPAN)/wireless local area network (WLAN) applications such as home high-definition multimedia streaming (uncompressed video).

Two short-range wireless technologies, IEEE 802.11ad (WiGig) and WirelessHD, are addressing this band’s potential. Other applications include backhaul for wireless base stations, wireless version USB 3.0 rated as high as 5 Gbs/s, and airport body scanners, to list a few. Also interestingly, the traditional shortcoming of high path loss (10–15 dB/km) due to atmospheric oxygen absorption around 60 GHz leads to this band’s other application potential of short-range radar and secure communication within limited area.

Switches, which can be electromechanical or solid-state, always play important roles in RF/Microwave/Millimeter-wave applications. In modern wireless communication, a switch is the key component in transceivers using Time Division Duplex (TDD) system to separate outward and return signals. In a complex system switches are often used to redirect the signal in order to re-use the circuit building blocks and/or pick up different sources or loads.

1705 HFE ISM fig01 1705 HFE ISM fig02

Electromechanical Switch            Solid-state Switch

RF and microwave switches are also used extensively in microwave test systems for signal routing between instruments and devices under test (DUT). For all these applications, a quality signal switching is crucial which means low through path insertion loss, high channel isolation, fast switching time, solid reliability and long lifetime. EM switches typically presents less insertion loss and higher isolation than its solid-state counterparts, but switch with much slower speed, less reliability and lifetime. Limited by its mechanical contact switching nature, performing EM switches are hardly obtained above 50 GHz. Solid-state switches which have nanosecond level switching time and compact profile are the preferable choice for the applications in 60 GHz ISM band and above.

To meet the increasing need for switches in 60 GHz ISM band, Ducommun recently developed several PIN diode based switches in the V band range of 50 - 75 GHz. These switches cover a variety of user interfaces, wide/narrow frequency range options, as well as multi-throw numbers to take care of various application requirements.

56 - 64 GHz SP4T PIN Diode Switch with WR-15 Interface

Model CP4-60086030-02 is a V-band single pole four throw reflective PIN diode switch fabricated in GaAs monolithic technology and incorporating a TTL compatible driver. The switch has WR-15 waveguide with UG-385/U-M flange as I/O interface and its primary function is to switch signals in the frequency range 56 to 64 GHz from one waveguide channel to others. The switch is operated by a pair of +/- 5 V DC bias and is activated by a 2-bit TTL signal, both applied through the Molex/10-pin control connector.

1705 HFE ISM fig04

CP4-60086030-02

This SP4T switch is realized by connecting three SPDT PIN devices as illustrated with RF and switch driver circuitries separated in their own cavities, to enhance the excellent channel isolation.  The 1.7” x 1.4” x 1.02” compact package is gold-plated and weighs 2 oz. The unit exhibits excellent insertion loss of typically smaller than 5dB, isolation of greater than 30 dB, as well as switching speed of faster than 100 ns within the range of 56-64 GHz.

The switch’s specifications and performance are summarized in the table and chart on the below.

1705 HFE ISM fig06

Switch control logic and outline

1705 HFE ISM fig07

Though not shown in the above performance chart, this switch is able to perform well beyond the specified range of 56 - 64 GHz. Also noteworthy is that via Ducommun’s proprietary filtering technology the switch’s video transient can be suppressed to the level of as low as 20 mVp-p. Other port options such as SPST, SPDT, SP6T and SP8T of this 56-64 GHz switches with WR-15 waveguide interface are also available for specifying.

58 - 64 GHz SP4T PIN Diode Coaxial Switch

Besides the 60 GHz PIN diode switches with WR-15 waveguide interface, Ducommun also offers single-pole multi-throw switches in coaxial form with 1.85 mm connectors to meet diversified application needs in V band. SPST, SPDT and SP4T switches are currently available. Shown is the SP4T model CP4-62804020-D2, which has the technical characteristic listed in the table on top of page 40.

1705 HFE ISM fig08

The SP4T switch is in a compact 1.7” x 1.4” x 1.02” gold-plated package, and its excellent isolation, low insertion loss and fast switching features make it a perfect switch of choice for RF engineers.

1705 HFE ISM fig09 1705 HFE ISM fig10

CP4-62804020-D2

WR-15 PIN Diode Switches Covering Full V-Band

CPS-63253025-01 and CPD-63254025-01 are Ducommun’s other two models of PIN switches which are SPST and SPDT, respectively, covering the full V band of 50 -75 GHz with extremely flat insertion loss and isolation performances. Employing inline and discrete PIN diode/Schottky diode technologies, these two models exhibit particularly low insertion loss which can be desired in many specific applications where loss induced degradation on receiving noise figure and/or transmitting power are sensitive and critical.

1705 HFE ISM fig11 1705 HFE ISM fig12

Full V band PIN diode Switches

Besides the above PIN diode switches for 60 GHz ISM band, Ducommun has a full line of electromechanical switch family (DC-46 GHz) and solid state PIN diode switch family (30 MHz-110 GHz) to supply the booming RF/Microwave/Millimeter-wave industry. Additional information about Ducommun’s EM and SS switch products can be obtained via email at This email address is being protected from spambots. You need JavaScript enabled to view it..">This email address is being protected from spambots. You need JavaScript enabled to view it..

About the Author

Dr. Kecheng Xiao is the engineering manager of RF product at Ducommun Inc. He received his PhD in astrophysics from Nagoya University, Japan and his BSEE & MSEE degrees in microwave/millimeter-wave technology from Southeast University, China. He has worked more than 30 years in mW/mmW area across academia and industry. His current interests include mmW component and subsystem development, low noise technology, sensor&radar, and wireless communications. He has been with Ducommun for 11 years.

May 2017

1702 HFE cover

The May 2017 Online Edition is now available for viewing and download!

Download May HFE PDF

Search

Web Exclusives

Contact Us

Scott Spencer
Publisher
603-759-1840

Tim Burkhard
Associate Publisher
707-544-9977
Fax: 707-544-9375

Gary Rhodes
VP Sales
631-274-9530
Fax: 631-667-2871

Jeff Victor
Advertising Sales - Western U.S. - New Accounts
224-436-8044
Fax: 509-472-1888

Keith Neighbour
Advertising Sales - Central US
773-275-4020
Fax: 773-275- 3438

Sam Baird
Advertising Sales - UK and Europe
+44 1883 715 697
Fax: +44 1883 715 697

Zena Coupé
Advertising Sales - UK and Europe
+44 1923 852 537
Fax: +44 1923 852 261

Joanne Frangides
Advertising Sales - New Accounts & Product Showcase
201-666-6698
Fax: 201-666-6698

Coming Events

NAB
Las Vegas
April 22-27, 2017
      IEEE AUTOTESTCON
Anaheim
September 9-15, 2017
     
WAMICON
Cocoa Beach
April 24-25, 2017
  EuMW2017
Nuremberg
October 8-13, 2017
     
NIWeek
Austin
May 22-25, 2017
  MILCOM 2017
Baltimore
October 23-25, 2017
     
2017 USNC-URSI
(Joint with AP-S Symposium)
San Diego
July 9-15, 2017
  AOC
Washington DC
November 28-30, 2017
     
IEEE EMC
Washington DC
August 7-11, 2017
  2018 IEEE Radio and Wireless Symposium
Garden Grove
January 15-18, 2018